Carriageway works need urgent review.
Reported anonymously at 16:38, Wed 12 December 2018
Sent to Nuneaton and Bedworth Borough Council and Warwickshire County Council 2 minutes later
The new speed tables and speed humps from recent carriageway repairs on Bulkington Lane, Nuneaton are dreadful. The ramp on and off the tables is so severe it's like climbing a kerb. Please review the angle of these fixtures, or you will be getting lots of damaged vehicle complaints - these are way too steep on a 30mph road.
Warwickshire County Council has received your report which will be reviewed accordingly. There are no automatic updates to the status of this report - this is something we are working on as part of the improvements to fault reporting
Posted by county highways at 17:58, Wed 12 December 2018
They are way too severe, drove at 15mph and have really jarred by neck and back, they are ridiculous, please look into this as a matter of urgency.
Posted anonymously at 18:54, Wed 12 December 2018
I can’t even drive safely over the new humps at 10mph it’s damaging my vehicle, it’s very uncomfortable and bringing traffic almost to a standstill.
Posted anonymously at 08:09, Thu 13 December 2018
The new speed bumbs placed on this road a ridiculous. They are so server, I've scrapped the bottom of my car going over at 10mph (I will be getting my car checked today and any damage caused, I will be sending you the bill for repair). It's also causing tail backs of traffic because vehicles are having to slow down to a crawl to get over each ramp. This needs addressing ASAP!
Posted anonymously at 08:54, Thu 13 December 2018
What are the surface texture depth results for the recently surfaced carriageway? How do they compare with the requirements in the Specification for Highway Works? The material appears to be a 10mm stone mastic asphalt, or (proprietary) derivative. Visually, it seems have very low surface texture along the road. With the requirements for speed humps, the controlled pedestrian crossing, interventions of side roads and bends, I would expect at least a texture depth of 1.5mm, with an appropriate aggregate psv, in excess of 58. Do you have data for skid resistance in accordance with HD 28/15?
Posted anonymously at 11:26, Fri 21 December 2018
Provide an update